Easy BACnet- Home
- BACnet points lists
- Regin
- Regio RTX room transmitter (firmware 2.0)
Room sensor / transmitter · BACnet points list
Regin Regio RTX room transmitter (firmware 2.0) BACnet points list
Updated 7 November 2026
Regio RTX is a communicating room transmitter in the Regio family, connected over RS485 with EXOline, Modbus or BACnet MS/TP. The variable list gives 119 BACnet objects: room temperature, CO2, humidity, VOC and presence readings, remote values with enable selectors, per-channel analog/digital input values and overrides, analog outputs with comm-loss defaults, display settings, an extension timer and two custom text rows.
This page lists 119 BACnet objects for the Regin Regio RTX room transmitter (firmware 2.0) — 80 of them writable — with each object’s type, instance number, name, engineering units and access. It is re-typed from Regin’s own free documentation, linked below.
- Manufacturer
- Regin
- Model
- Regio RTX room transmitter (firmware 2.0)
- Equipment
- Room sensor / transmitter
- Equipment type
- Thermostats, sensors & meters
- BACnet objects
- 119 (80 writable)
- Transport
- BACnet MS/TP
- Firmware
- RTX-2.0-1-02
- Also known as
- RTX, Regio RTX, RTX-2.0-1-02, Regin RTX
- Source document
- RTX-2.0-1-02 - Variable list · variables_rtx (Revision A)
Reference only, provided as-is: verify against Regin’s current documentation and the live device before use. Not official Regin information. Terms of use.
BMS integration notes: Regin Regio RTX room transmitter (firmware 2.0)
Read AV 10002 room temperature, AV 10011 CO2, AV 10071 humidity, AV 10281 VOC index and BV 10001 presence. Keep BV 9101 RC_OfflineTrigger pulsing if the offline function is used. Values from the BMS can replace the local sensors through the …Remote AVs and their …RemoteSelect BVs.
Minimum points to map
The short list most integrators start with — enough to run the unit from a BMS. Map more as the job needs.
| Object | Name | Why | Access |
|---|---|---|---|
| BV 9101 | RC_OfflineTrigger | Write 1 periodically to stay in normal mode | Write |
| AV 10002 | RC_RoomTemp | Room temperature, °C | Read |
| AV 10011 | RC_CO2Level | Room CO2, ppm | Read |
| AV 10071 | RC_Humidity | Room relative humidity | Read |
| AV 10281 | RC_VOC | VOC index | Read |
| BV 10001 | RC_Presence | Presence indication | Read |
Heartbeat & communication loss
BV 9101 RC_OfflineTrigger must be written to 1 periodically (the application sets it back to 0) within RC_OfflineTimeout, default 10 s (that timeout is not a BACnet object). MV 9301 RC_OfflineFunction sets the offline reaction. Analog outputs fall back to their IoAnaOut_n_default AV when communication is lost.
Sensors & values from the BMS
AV 10611 / 10621 / 10681 / 10691 take remote room temperature, CO2, humidity and VOC values, each enabled by its …RemoteSelect BV (10321 / 10331 / 10391 / 10401). BV 10411 with BV 10481 does the same for the presence input.
Network setup
- Port 1 (RS485) protocol, baud rate and format are MV 9001 / 9101 / 9201; write BV 9001 RC_CommSettingsCommit = 1 to apply them.
Watch out for
- The ..._override_en BVs force an input or output to its override value; clear them after testing.
Regin Regio RTX room transmitter (firmware 2.0) BACnet objects
Type: AI, AO, AV, BI, BO, BV, MI/MO/MV (multi-state) · Access: Read read-only, Write writable, Command writable with a priority array.
| Description | States | |||||
|---|---|---|---|---|---|---|
| PIV | 9011 | rc_wink | Wink for this amount of time in seconds | Write | ||
| BV | 9001 | RC_CommSettingsCommit | Commit communication settings | Write | ||
| MV | 9001 | RC_Port1Mode | Comm. protocol Port 1 (RS485) | Write | ||
| MV | 9101 | RC_Port1Baud | Comm. speed Port 1 (RS485) | Write | ||
| MV | 9201 | RC_Port1Format | Comm. format Port 1 (RS485) | Write | ||
| BVmin | 9101 | RC_OfflineTrigger | Write 1 periodically to stay in normal mode; app resets it to 0 | Write | ||
| MV | 9301 | RC_OfflineFunction | Offline function | Write | ||
| AVmin | 10002 | RC_RoomTemp | Room temperature | °C | Read | |
| AVmin | 10011 | RC_CO2Level | Room CO2 level | ppm | Read | |
| AVmin | 10071 | RC_Humidity | Relative humidity | %RH | Read | |
| BVmin | 10001 | RC_Presence | Presence indication | Read | ||
| BV | 10011 | RC_DIPresence | DI Presence indication | Read | ||
| BV | 10021 | RC_CO2Presence | CO2 Presence indication | Read | ||
| AVmin | 10281 | RC_VOC | VOC index | Read | ||
| MV | 10021 | RC_CO2Indicator | RGB CO2 indication | Read | ||
| AV | 10311 | RC_CO2LevelRounded | Rounded room CO2 level | ppm | Read | |
| AV | 10611 | RC_RoomTempRemote | Remote setting of room temperature | °C | Write | |
| AV | 10621 | RC_CO2LevelRemote | Remote setting of room CO2 level | ppm | Write | |
| AV | 10681 | RC_HumidityRemote | Remote setting of relative humidity | %RH | Write | |
| AV | 10691 | RC_VOCRemote | Remote setting of VOC index | Write | ||
| BV | 10321 | RC_RoomTempRemoteSelect | Enable remote setting of room temperature | Write | ||
| BV | 10331 | RC_CO2LevelRemoteSelect | Enable remote setting of room CO2 level | Write | ||
| BV | 10391 | RC_HumidityRemoteSelect | Enable remote setting of relative humidity | Write | ||
| BV | 10401 | RC_VOCRemoteSelect | Enable remote setting of VOC index | Write | ||
| BV | 10411 | RC_DIPresenceRemote | Remote setting of presence digital input | Write | ||
| BV | 10481 | RC_DIPresenceRemoteSelect | Enable remote setting of presence digital input | Write | ||
| AV | 1001 | IoAnaIn_1_value | Filtered value from sensor | Read | ||
| AV | 1101 | IoAnaIn_1_override | Override value | Write | ||
| BV | 1001 | IoAnaIn_1_override_en | Set to 1 to enable override | Write | ||
| AV | 1002 | IoAnaIn_2_value | Filtered value from sensor | Read | ||
| AV | 1102 | IoAnaIn_2_override | Override value | Write | ||
| BV | 1002 | IoAnaIn_2_override_en | Set to 1 to enable override | Write | ||
| AV | 1003 | IoAnaIn_3_value | Filtered value from sensor | Read | ||
| AV | 1103 | IoAnaIn_3_override | Override value | Write | ||
| BV | 1003 | IoAnaIn_3_override_en | Set to 1 to enable override | Write | ||
| AV | 1004 | IoAnaIn_4_value | Filtered value from sensor | Read | ||
| AV | 1104 | IoAnaIn_4_override | Override value | Write | ||
| BV | 1004 | IoAnaIn_4_override_en | Set to 1 to enable override | Write | ||
| AV | 1005 | IoAnaIn_5_value | Filtered value from sensor | Read | ||
| AV | 1105 | IoAnaIn_5_override | Override value | Write | ||
| BV | 1005 | IoAnaIn_5_override_en | Set to 1 to enable override | Write | ||
| AV | 1006 | IoAnaIn_6_value | Filtered value from sensor | Read | ||
| AV | 1106 | IoAnaIn_6_override | Override value | Write | ||
| BV | 1006 | IoAnaIn_6_override_en | Set to 1 to enable override | Write | ||
| AV | 1007 | IoAnaIn_7_value | Filtered value from sensor | Read | ||
| AV | 1107 | IoAnaIn_7_override | Override value | Write | ||
| BV | 1007 | IoAnaIn_7_override_en | Set to 1 to enable override | Write | ||
| AV | 1008 | IoAnaIn_8_value | Filtered value from sensor | Read | ||
| AV | 1108 | IoAnaIn_8_override | Override value | Write | ||
| BV | 1008 | IoAnaIn_8_override_en | Set to 1 to enable override | Write | ||
| AV | 1009 | IoAnaIn_9_value | Filtered value from sensor | Read | ||
| AV | 1109 | IoAnaIn_9_override | Override value | Write | ||
| BV | 1009 | IoAnaIn_9_override_en | Set to 1 to enable override | Write | ||
| AV | 1010 | IoAnaIn_10_value | Filtered value from sensor | Read | ||
| AV | 1110 | IoAnaIn_10_override | Override value | Write | ||
| BV | 1010 | IoAnaIn_10_override_en | Set to 1 to enable override | Write | ||
| AV | 1011 | IoAnaIn_11_value | Filtered value from sensor | Read | ||
| AV | 1111 | IoAnaIn_11_override | Override value | Write | ||
| BV | 1011 | IoAnaIn_11_override_en | Set to 1 to enable override | Write | ||
| BV | 1101 | IoDiIn_1_value | Filtered value from sensor | Read | ||
| PIV | 10000 | IoDiIn_1_pulse1 | Pulse counter 1 | Read | ||
| PIV | 10002 | IoDiIn_1_pulse2 | Pulse counter 2 | Read | ||
| AV | 10000 | IoDiIn_1_pulserate | Pulse rate in Hz | Hz | Read | |
| BV | 1201 | IoDiIn_1_override | Override value | Write | ||
| BV | 1301 | IoDiIn_1_override_en | Set to 1 to enable override | Write | ||
| BV | 1102 | IoDiIn_2_value | Filtered value from sensor | Read | ||
| PIV | 10001 | IoDiIn_2_pulse1 | Pulse counter 1 | Read | ||
| PIV | 10003 | IoDiIn_2_pulse2 | Pulse counter 2 | Read | ||
| AV | 10001 | IoDiIn_2_pulserate | Pulse rate in Hz | Hz | Read | |
| BV | 1202 | IoDiIn_2_override | Override value | Write | ||
| BV | 1302 | IoDiIn_2_override_en | Set to 1 to enable override | Write | ||
| BV | 1103 | IoDiIn_3_value | Filtered value from sensor | Read | ||
| BV | 1203 | IoDiIn_3_override | Override value | Write | ||
| BV | 1303 | IoDiIn_3_override_en | Set to 1 to enable override | Write | ||
| BV | 1104 | IoDiIn_4_value | Filtered value from sensor | Read | ||
| BV | 1204 | IoDiIn_4_override | Override value | Write | ||
| BV | 1304 | IoDiIn_4_override_en | Set to 1 to enable override | Write | ||
| AV | 1201 | IoAnaOut_1_value | Value in % set for output | % | Write | |
| AV | 1301 | IoAnaOut_1_default | Default value if communication is lost | % | Write | |
| AV | 1401 | IoAnaOut_1_converted | Actual value on the output pin in Volt or milliampere | V | Read | |
| AV | 1501 | IoAnaOut_1_override | Override value | % | Write | |
| BV | 1401 | IoAnaOut_1_override_en | Set to 1 to enable override | Write | ||
| AV | 1202 | IoAnaOut_2_value | Value in % set for output | % | Write | |
| AV | 1302 | IoAnaOut_2_default | Default value if communication is lost | % | Write | |
| AV | 1402 | IoAnaOut_2_converted | Actual value on the output pin in Volt or milliampere | V | Read | |
| AV | 1502 | IoAnaOut_2_override | Override value | % | Write | |
| BV | 1402 | IoAnaOut_2_override_en | Set to 1 to enable override | Write | ||
| AV | 1203 | IoAnaOut_3_value | Value in % set for output | % | Write | |
| AV | 1303 | IoAnaOut_3_default | Default value if communication is lost | % | Write | |
| AV | 1403 | IoAnaOut_3_converted | Actual value on the output pin in Volt or milliampere | V | Read | |
| AV | 1503 | IoAnaOut_3_override | Override value | % | Write | |
| BV | 1403 | IoAnaOut_3_override_en | Set to 1 to enable override | Write | ||
| AV | 1204 | IoAnaOut_4_value | Value in % set for output | % | Write | |
| AV | 1304 | IoAnaOut_4_default | Default value if communication is lost | % | Write | |
| AV | 1404 | IoAnaOut_4_converted | Actual value on the output pin in Volt or milliampere | V | Read | |
| AV | 1504 | IoAnaOut_4_override | Override value | % | Write | |
| BV | 1404 | IoAnaOut_4_override_en | Set to 1 to enable override | Write | ||
| AV | 8001 | Disp_BrightnessFull | Display brightness, full (%) | % | Write | |
| AV | 8011 | Disp_BrightnessDim | Display brightness, dimmed (%) | % | Write | |
| AV | 8021 | Disp_TimeFull | Display time in full mode. 0 = Never dim | s | Write | |
| AV | 8031 | Disp_TimeDim | Display time in dimmed mode. 0 = Never off | s | Write | |
| AV | 11000 | rt_exttime_step_size | Step size in minutes for each button press | min | Write | |
| AV | 11001 | rt_exttime_steps | Number of steps before cycling back to off | Write | ||
| AV | 11002 | rt_exttime_timeleft | Time remaining | min | Write | |
| BV | 11000 | rt_exttime_state | Current timer state | Read | ||
| AV | 11003 | out_ch_1 | This is the calculated value for this output | Read | ||
| BV | 11001 | out_ch_1_enable | Enable the output mapping | Write | ||
| AV | 11004 | out_ch_2 | This is the calculated value for this output | Read | ||
| BV | 11002 | out_ch_2_enable | Enable the output mapping | Write | ||
| AV | 11005 | out_ch_3 | This is the calculated value for this output | Read | ||
| BV | 11003 | out_ch_3_enable | Enable the output mapping | Write | ||
| AV | 11006 | out_ch_4 | This is the calculated value for this output | Read | ||
| BV | 11004 | out_ch_4_enable | Enable the output mapping | Write | ||
| MV | 11002 | rt_text_display_scroll_mode | Scroll mode | Write | ||
| AV | 11007 | rt_text_display_scroll_speed | Time in ms between scrolling one pixel | ms | Write | |
| MV | 11003 | rt_text_visability | When to show the custom text | Write | ||
| AV | 11008 | rt_text_timeleft | Time to show the custom text | s | Write | |
| CSV | 11000 | rt_text_row_1 | String to show on row 1 in the display | Write | ||
| CSV | 11001 | rt_text_row_2 | String to show on row 2 in the display | Write |
No points match these filters.
Object ID lookup: Regin Regio RTX room transmitter point IDs by name
PIV9011rc_winkBV9001RC_CommSettingsCommitMV9001RC_Port1ModeMV9101RC_Port1BaudMV9201RC_Port1FormatBV9101RC_OfflineTriggerMV9301RC_OfflineFunctionAV10002RC_RoomTempAV10011RC_CO2LevelAV10071RC_HumidityBV10001RC_PresenceBV10011RC_DIPresenceBV10021RC_CO2PresenceAV10281RC_VOCMV10021RC_CO2IndicatorAV10311RC_CO2LevelRoundedAV10611RC_RoomTempRemoteAV10621RC_CO2LevelRemoteAV10681RC_HumidityRemoteAV10691RC_VOCRemoteBV10321RC_RoomTempRemoteSelectBV10331RC_CO2LevelRemoteSelectBV10391RC_HumidityRemoteSelectBV10401RC_VOCRemoteSelectBV10411RC_DIPresenceRemoteBV10481RC_DIPresenceRemoteSelectAV1001IoAnaIn_1_valueAV1101IoAnaIn_1_overrideBV1001IoAnaIn_1_override_enAV1002IoAnaIn_2_valueAV1102IoAnaIn_2_overrideBV1002IoAnaIn_2_override_enAV1003IoAnaIn_3_valueAV1103IoAnaIn_3_overrideBV1003IoAnaIn_3_override_enAV1004IoAnaIn_4_valueAV1104IoAnaIn_4_overrideBV1004IoAnaIn_4_override_enAV1005IoAnaIn_5_valueAV1105IoAnaIn_5_overrideBV1005IoAnaIn_5_override_enAV1006IoAnaIn_6_valueAV1106IoAnaIn_6_overrideBV1006IoAnaIn_6_override_enAV1007IoAnaIn_7_valueAV1107IoAnaIn_7_overrideBV1007IoAnaIn_7_override_enAV1008IoAnaIn_8_valueAV1108IoAnaIn_8_overrideBV1008IoAnaIn_8_override_enAV1009IoAnaIn_9_valueAV1109IoAnaIn_9_overrideBV1009IoAnaIn_9_override_enAV1010IoAnaIn_10_valueAV1110IoAnaIn_10_overrideBV1010IoAnaIn_10_override_enAV1011IoAnaIn_11_valueAV1111IoAnaIn_11_overrideBV1011IoAnaIn_11_override_enBV1101IoDiIn_1_valuePIV10000IoDiIn_1_pulse1PIV10002IoDiIn_1_pulse2AV10000IoDiIn_1_pulserateBV1201IoDiIn_1_overrideBV1301IoDiIn_1_override_enBV1102IoDiIn_2_valuePIV10001IoDiIn_2_pulse1PIV10003IoDiIn_2_pulse2AV10001IoDiIn_2_pulserateBV1202IoDiIn_2_overrideBV1302IoDiIn_2_override_enBV1103IoDiIn_3_valueBV1203IoDiIn_3_overrideBV1303IoDiIn_3_override_enBV1104IoDiIn_4_valueBV1204IoDiIn_4_overrideBV1304IoDiIn_4_override_enAV1201IoAnaOut_1_valueAV1301IoAnaOut_1_defaultAV1401IoAnaOut_1_convertedAV1501IoAnaOut_1_overrideBV1401IoAnaOut_1_override_enAV1202IoAnaOut_2_valueAV1302IoAnaOut_2_defaultAV1402IoAnaOut_2_convertedAV1502IoAnaOut_2_overrideBV1402IoAnaOut_2_override_enAV1203IoAnaOut_3_valueAV1303IoAnaOut_3_defaultAV1403IoAnaOut_3_convertedAV1503IoAnaOut_3_overrideBV1403IoAnaOut_3_override_enAV1204IoAnaOut_4_valueAV1304IoAnaOut_4_defaultAV1404IoAnaOut_4_convertedAV1504IoAnaOut_4_overrideBV1404IoAnaOut_4_override_enAV8001Disp_BrightnessFullAV8011Disp_BrightnessDimAV8021Disp_TimeFullAV8031Disp_TimeDimAV11000rt_exttime_step_sizeAV11001rt_exttime_stepsAV11002rt_exttime_timeleftBV11000rt_exttime_stateAV11003out_ch_1BV11001out_ch_1_enableAV11004out_ch_2BV11002out_ch_2_enableAV11005out_ch_3BV11003out_ch_3_enableAV11006out_ch_4BV11004out_ch_4_enableMV11002rt_text_display_scroll_modeAV11007rt_text_display_scroll_speedMV11003rt_text_visabilityAV11008rt_text_timeleftCSV11000rt_text_row_1CSV11001rt_text_row_2
Integration notes
- Taken from Regin's RTX variable list (xlsx), 'Object type', 'Instance', 'Unit' and 'Writeable' columns; the same file lists the EXOline and Modbus addresses. Names are the variable names in the list's Name column.
- 6 rows have a BACnet object type but no instance (pulse counters and pulse rate of digital inputs 3 and 4); they are left out.
- Regin's combined EDE zip for RCX/RTX/RUX 2.1-1-01 holds only an RCX file, so multistate state texts are not available for the RTX and are left blank.
- Which inputs and outputs are wired depends on the RTX variant; the I/O channel objects exist in the list either way.
Check it against the live device. A points list tells you what the controller can expose; the unit in front of you may differ by firmware or installed options. This list is provided as-is for reference only and may contain mistakes — confirming it before you write, map or commission anything is up to you (terms). Easy BACnet scans a network for BACnet IP devices from an Android phone, reads every object on the Regio RTX room transmitter (firmware 2.0) and exports what it actually has to Excel — free. New to BACnet? Start with what a BACnet points list is and what the object types mean.
Questions about the Regin Regio RTX room transmitter (firmware 2.0)
How many BACnet points does the Regin Regio RTX room transmitter (firmware 2.0) have?
This list has 119 BACnet objects: 62 analog values, 43 binary values, 7 multi-state values, 2 characterstring values, 5 positive integer values. The exact set on a given unit depends on its firmware, installed options and configuration.
Which Regin Regio RTX room transmitter (firmware 2.0) BACnet points are writable?
80 of the 119 objects accept a write. Points marked Command have a priority array: a write holds until it is released, so release it back to automatic when you are done.
Where is the official Regin Regio RTX room transmitter (firmware 2.0) BACnet documentation?
The source is RTX-2.0-1-02 - Variable list (variables_rtx (Revision A)), published free by Regin at https://www.regincontrols.com/globalassets/pimmediafiles/documents/variables_rtx.xlsx.
What are the minimum BACnet points to integrate the Regin Regio RTX room transmitter (firmware 2.0)?
Start with BV 9101 RC_OfflineTrigger (Write 1 periodically to stay in normal mode); AV 10002 RC_RoomTemp (Room temperature, °C); AV 10011 RC_CO2Level (Room CO2, ppm); AV 10071 RC_Humidity (Room relative humidity); AV 10281 RC_VOC (VOC index); BV 10001 RC_Presence (Presence indication).
Does the Regin Regio RTX room transmitter (firmware 2.0) need a BACnet heartbeat or have a communication timeout?
BV 9101 RC_OfflineTrigger must be written to 1 periodically (the application sets it back to 0) within RC_OfflineTimeout, default 10 s (that timeout is not a BACnet object). MV 9301 RC_OfflineFunction sets the offline reaction. Analog outputs fall back to their IoAnaOut_n_default AV when communication is lost.
Can the BMS supply sensor values to the Regin Regio RTX room transmitter (firmware 2.0)?
AV 10611 / 10621 / 10681 / 10691 take remote room temperature, CO2, humidity and VOC values, each enabled by its …RemoteSelect BV (10321 / 10331 / 10391 / 10401). BV 10411 with BV 10481 does the same for the presence input.
How do I check these points on the real Regio RTX room transmitter (firmware 2.0)?
Scan the network with a BACnet IP browser such as Easy BACnet, open the device and compare its object list with this table. Anything missing is usually an option that isn't installed or a point that is disabled in the controller's configuration.
More Regin BACnet points lists
- Air handling unit controller
Regin Corrigo 5.0 ventilation (AHU) controller
Regin Corrigo 5.0 ventilation controllers for air handling units (supply/extract fans, heating/cooling sequences, heat recovery).
Also known as: Corrigo 5.0, Corrigo 5, Corrigo ventilation, Regin Corrigo, BACnet_Corrigo50 - Heating controller (boiler, district heating, domestic hot water)
Regin Exigo 4.3 heating controller
Regin Exigo 4.3 heating controllers: up to 4 heating circuits, 2 hot-water circuits, boilers, district heating, solar and buffer tanks.
Also known as: Exigo 4.3, Exigo, Exigo Ardo, Exigo Vido, Regin Exigo, BACnet_Exigo43 - Differential pressure / airflow sensor (transmitter)
Regin Presigo PDTN differential pressure transmitter (firmware 1.1)
Regin Presigo PDTN one- and two-channel differential pressure transmitters with display, firmware 1.1-1-00.
Also known as: PDTN, Presigo PDTN, PDTN 1.1-1-00, Regin PDTN - Fan coil room controller
Regin RCF fan coil room controllers (RCF-230CD, RCF-230CAD, RCF-230CTD, RCF-230CTD-EC)
Regin RCF 230 V wall-mounted fan coil controllers with built-in communication (models with a C in the name).
Also known as: RCF, Regio RCF, RCF-230CD, RCF-230CAD, RCF-230CTD, RCF-230CTD-EC - Room controller (fan coil, radiator, VAV)
Regin Regio Midi room controllers (RC-CDFO, RC-CDTO, RC-C3DOC, RC-C3DFOC, RCC-C3DOCS)
Regin Regio Midi pre-programmed room controllers with display, which are the Midi models that can talk BACnet MS/TP.
Also known as: Regio Midi, RC-CDFO, RC-CDTO, RC-C3DOC, RC-C3DFOC, RCC-C3DOCS, RC-C - Room controller (fan coil / VAV / chilled beam)
Regin Regio RCX room controller (firmware 2.1)
Regin Regio RCX room controllers with firmware 2.1 (fan coil, radiator, chilled beam and VAV applications).
Also known as: RCX, Regio RCX, RCX-..., RCX 2.1-1-xx, Regin RCX - Room sensor / operator unit
Regin Regio RUX room unit / display (firmware 2.1)
Regin Regio RUX room units (temperature, CO2, humidity, VOC sensing with display) with firmware 2.1.
Also known as: RUX, Regio RUX, RUX 2.1-1-xx, Regin RUX - Room controller (chilled beam, radiator, VAV damper)
Regin RegioArdo two-room controller (dampers, chilled beams, radiators)
Regin RegioArdo 24 V AC pre-programmed two-room controllers for dampers, chilled beams and radiators, used with ED-RU room units.
Also known as: Regio Ardo, RegioArdo, Regio Ardo 2.0 - Fan coil room controller
Regin RegioEedo fan coil room controller
Regin RegioEedo 230 V AC pre-programmed fan coil controllers, used with ED-RU room units.
Also known as: Regio Eedo, RegioEedo, Regio Eedo 2.0
Source: RTX-2.0-1-02 - Variable list · variables_rtx (Revision A). Object names, instances and units are reproduced as published; descriptions are our own.