1. Home
2. BACnet points lists
3. Leviton
4. VerifEye Series 8000 multi-circuit meter (3P-08 example)

Power meter (multi-circuit submeter) · BACnet points list

Leviton VerifEye Series 8000 multi-circuit meter (3P-08 example) BACnet points list

Updated 6 November 2026

Manufacturer

Leviton

Model

VerifEye Series 8000 multi-circuit meter (3P-08 example)

Equipment

Power meter (multi-circuit submeter)

Equipment type

Thermostats, sensors & meters

BACnet objects

256 (0 writable)

Transport

BACnet IP

Firmware

BACnet firmware 1.4.0 or later (Meter Shop configuration tool 1.5.0); example unit 1.41/1.42

Default device instance

4194303

Also known as

VerifEye 8000, Series 8000, S8000, PowerHawk, Triacta PowerHawk, PowerHawk 4224-120V-3P-08, 3P-08

Source document

VerifEye Series 8000 BACnet Configuration Guide - 2.1 Points List Summary

Reference only, provided as-is: verify against Leviton’s current documentation and the live device before use. Not official Leviton information. Terms of use.

Leviton VerifEye Series 8000 multi-circuit meter (3P-08 example) BACnet objects

Type: AI, AO, AV, BI, BO, BV, MI/MO/MV (multi-state) · Access: Read read-only, Write writable, Command writable with a priority array.

Note: the source document has no read/write column, so access here is inferred from the object type (inputs read-only, values writable). Confirm on the live controller before writing.

No points match these filters. Clear filters

Integration notes

• Taken from '2.1 Points List Summary' (pp6-11), printed as an image of a BACnet browser tree; read by OCR and checked against the page. It is the 3P-08 example: other configurations (3P-02, 1P/2P-03, 1P/2P-06, 1P/2P-12, 1P/2P-24) change how many meters and elements exist, so the instance numbers shift.
• Instances run in blocks of eight meters: AI 0-31 per-meter totals, AI 32-199 per-element values (current, voltage, active/reactive/apparent power, power factor, phase angle; elements 0-2), AI 200-215 peak and present demand, ACC 0-39 energy registers.
• Accumulators are BACnet Accumulator objects (type 23). The doc's sample property dump shows watt_hours as the units property on every accumulator, including the reactive and apparent registers; units for the analog inputs are not given.
• Access is inferred: the doc has no read/write column; all objects are inputs or accumulators and are listed read-only.
• Peak demand timestamp: proprietary property 1500 on each peak demand object (Unix 32-bit time). Writing any value to property 1501 on the device object resets peak demand on all meters.

Questions about the Leviton VerifEye Series 8000 multi-circuit meter (3P-08 example)

Source: VerifEye Series 8000 BACnet Configuration Guide - 2.1 Points List Summary. Object names, instances and units are reproduced as published; descriptions are our own.